[root@localhost ~]# lscpu
Architecture:             x86_64
  CPU op-mode(s):         32-bit, 64-bit
  Address sizes:          46 bits physical, 48 bits virtual
  Byte Order:             Little Endian
CPU(s):                   48
  On-line CPU(s) list:    0-47
Vendor ID:                GenuineIntel
  BIOS Vendor ID:         Intel(R) Corporation
  Model name:             Intel(R) Xeon(R) Silver 4214 CPU @ 2.20GHz
    BIOS Model name:      Intel(R) Xeon(R) Silver 4214 CPU @ 2.20GHz  CPU @ 2.2GHz
    BIOS CPU family:      179
    CPU family:           6
    Model:                85
    Thread(s) per core:   2
    Core(s) per socket:   12
    Socket(s):            2
    Stepping:             7
    CPU(s) scaling MHz:   33%
    CPU max MHz:          3200.0000
    CPU min MHz:          1000.0000

[root@localhost ~]# lsmem
RANGE                                  SIZE  STATE REMOVABLE BLOCK
0x0000000000000000-0x000000007fffffff    2G online       yes     0
0x0000000100000000-0x000000307fffffff  190G online       yes  2-96

Memory block size:         2G
Total online memory:     192G
Total offline memory:      0B
[root@localhost ~]# lsblk
NAME               MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sda                  8:0    0 447.1G  0 disk
├─sda1               8:1    0   600M  0 part /boot/efi
├─sda2               8:2    0     1G  0 part /boot
└─sda3               8:3    0 445.5G  0 part
  ├─openeuler-root 253:0    0   200G  0 lvm  /
  ├─openeuler-swap 253:1    0    16G  0 lvm  [SWAP]
  └─openeuler-home 253:2    0 229.5G  0 lvm  /home
sdb                  8:16   0   2.6T  0 disk
sdc                  8:32   0 138.3T  0 disk
sr0                 11:0    1  1024M  0 rom

[root@localhost ~]# cat /etc/os-release
NAME="openEuler"
VERSION="22.03 (LTS-SP3)"
ID="openEuler"
VERSION_ID="22.03"
PRETTY_NAME="openEuler 22.03 (LTS-SP3)"
ANSI_COLOR="0;31"

[root@localhost ~]# uname -a
Linux localhost.localdomain 5.10.0-182.0.0.95.oe2203sp3.x86_64 #1 SMP Sat Dec 30 13:10:36 CST 2023 x86_64 x86_64 x86_64 GNU/Linux

[root@localhost ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute
       valid_lft forever preferred_lft forever
2: eno3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether bc:16:95:28:6e:6f brd ff:ff:ff:ff:ff:ff
3: ens5f0np0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether bc:16:95:25:12:43 brd ff:ff:ff:ff:ff:ff
4: eno4: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether bc:16:95:28:6e:70 brd ff:ff:ff:ff:ff:ff
5: ens5f1np1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000
    link/ether bc:16:95:25:12:44 brd ff:ff:ff:ff:ff:ff
6: ens6f0np0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether bc:16:95:25:6b:5f brd ff:ff:ff:ff:ff:ff
7: ens6f1np1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000
    link/ether bc:16:95:25:12:44 brd ff:ff:ff:ff:ff:ff permaddr bc:16:95:25:6b:60
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether bc:16:95:25:12:44 brd ff:ff:ff:ff:ff:ff
    inet 192.168.11.14/24 brd 192.168.11.255 scope global noprefixroute bond0
       valid_lft forever preferred_lft forever
    inet6 fe80::be16:95ff:fe25:1244/64 scope link proto kernel_ll
       valid_lft forever preferred_lft forever

我有一台物理服务的相关信息如上

如下基本条件：
1. 无法使用物理机的管理平台，无法使用物理机管理的VNC
2. 宿主机操作系统尽量不会要更换，有操作系统审计
3. 端口是全开放的
4. 尽量避免破坏操作系统，重装非常麻烦
5. sda为SSD，sdb为NVMe，sdc为SATA

需求如下：
1. sda为宿主机系统盘，sdb为虚拟机系统盘，sdc为虚拟机存储盘
2. 研究合适的虚拟机软件，尽量选择oVirit，之前我尝试在openEuler24.03上安装oVirit导致操作系统损坏
3. 不需要磁盘格式化的操作，我已经有了