ProjectAGiPrompt/20-物理服务器虚拟机/物理服务器信息.md

[root@localhost ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 46 bits physical, 48 bits virtual Byte Order: Little Endian CPU(s): 48 On-line CPU(s) list: 0-47 Vendor ID: GenuineIntel BIOS Vendor ID: Intel(R) Corporation Model name: Intel(R) Xeon(R) Silver 4214 CPU @ 2.20GHz BIOS Model name: Intel(R) Xeon(R) Silver 4214 CPU @ 2.20GHz CPU @ 2.2GHz BIOS CPU family: 179 CPU family: 6 Model: 85 Thread(s) per core: 2 Core(s) per socket: 12 Socket(s): 2 Stepping: 7 CPU(s) scaling MHz: 33% CPU max MHz: 3200.0000 CPU min MHz: 1000.0000

[root@localhost ~]# lsmem RANGE SIZE STATE REMOVABLE BLOCK 0x0000000000000000-0x000000007fffffff 2G online yes 0 0x0000000100000000-0x000000307fffffff 190G online yes 2-96

Memory block size: 2G Total online memory: 192G Total offline memory: 0B [root@localhost ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 447.1G 0 disk ├─sda1 8:1 0 600M 0 part /boot/efi ├─sda2 8:2 0 1G 0 part /boot └─sda3 8:3 0 445.5G 0 part ├─openeuler-root 253:0 0 200G 0 lvm / ├─openeuler-swap 253:1 0 16G 0 lvm [SWAP] └─openeuler-home 253:2 0 229.5G 0 lvm /home sdb 8:16 0 2.6T 0 disk sdc 8:32 0 138.3T 0 disk sr0 11:0 1 1024M 0 rom

[root@localhost ~]# cat /etc/os-release NAME="openEuler" VERSION="22.03 (LTS-SP3)" ID="openEuler" VERSION_ID="22.03" PRETTY_NAME="openEuler 22.03 (LTS-SP3)" ANSI_COLOR="0;31"

[root@localhost ~]# uname -a Linux localhost.localdomain 5.10.0-182.0.0.95.oe2203sp3.x86_64 #1 SMP Sat Dec 30 13:10:36 CST 2023 x86_64 x86_64 x86_64 GNU/Linux

[root@localhost ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 2: eno3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether bc:16:95:28:6e:6f brd ff:ff:ff:ff:ff:ff 3: ens5f0np0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether bc:16:95:25:12:43 brd ff:ff:ff:ff:ff:ff 4: eno4: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether bc:16:95:28:6e:70 brd ff:ff:ff:ff:ff:ff 5: ens5f1np1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether bc:16:95:25:12:44 brd ff:ff:ff:ff:ff:ff 6: ens6f0np0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether bc:16:95:25:6b:5f brd ff:ff:ff:ff:ff:ff 7: ens6f1np1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether bc:16:95:25:12:44 brd ff:ff:ff:ff:ff:ff permaddr bc:16:95:25:6b:60 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether bc:16:95:25:12:44 brd ff:ff:ff:ff:ff:ff inet 192.168.11.14/24 brd 192.168.11.255 scope global noprefixroute bond0 valid_lft forever preferred_lft forever inet6 fe80::be16:95ff:fe25:1244/64 scope link proto kernel_ll valid_lft forever preferred_lft forever

我有一台物理服务的相关信息如上

如下基本条件：

1. 无法使用物理机的管理平台，无法使用物理机管理的VNC
2. 宿主机操作系统尽量不会要更换，有操作系统审计
3. 端口是全开放的
4. 尽量避免破坏操作系统，重装非常麻烦
5. sda为SSD，sdb为NVMe，sdc为SATA

需求如下：

1. sda为宿主机系统盘，sdb为虚拟机系统盘，sdc为虚拟机存储盘
2. 研究合适的虚拟机软件，尽量选择oVirit，之前我尝试在openEuler24.03上安装oVirit导致操作系统损坏
3. 不需要磁盘格式化的操作，我已经有了